Dash first fix

Dash in place

 Steering wheel re-fitted

Dash prep

First fix of dials, lights and switches.

Rear Lights

Rear lights needed a fair bit of trimming for a good fit, used a tile profile gauge to get the edge shape and then some U-Trim to close any gaps - really pleased with the finish. Starting to look like a car from the back

Working at the rear.......

Bolted on roll bar - Plays-kool Motorsport MSA spec. 

Then moved onto the fuel filler cap, started by using a steel rule to mark the top centre of the fuel filler pipe from within the car. I then drilled a small pilot hole through to give a reference.

 from outside

 Using the pilot hole for reference I drew around the securing ring,

 and chain drilled the hole out

 this was tided with a flap wheel attachment out to the exact size of the hole

 added the securing holes and 

 Bob is your Dads brother

 view from inside

Body continues and water works

Continued with body alignment using the bonnet at the datum - 

Bonnet hinges fitted

and body riveted top (counter sunk) and underside (large head) 

water pipes in place

including Westfield hockey stick, mounted on stand-offs 

connected to radiator top and bottom, bleed pipe capped off

new gear knob via Ebay