Dash first fix

Dash in place

 Steering wheel re-fitted

Dash prep

First fix of dials, lights and switches.

Rear Lights

Rear lights needed a fair bit of trimming for a good fit, used a tile profile gauge to get the edge shape and then some U-Trim to close any gaps - really pleased with the finish. Starting to look like a car from the back

Working at the rear.......

Bolted on roll bar - Plays-kool Motorsport MSA spec. 

Then moved onto the fuel filler cap, started by using a steel rule to mark the top centre of the fuel filler pipe from within the car. I then drilled a small pilot hole through to give a reference.

 from outside

 Using the pilot hole for reference I drew around the securing ring,

 and chain drilled the hole out

 this was tided with a flap wheel attachment out to the exact size of the hole

 added the securing holes and 

 Bob is your Dads brother

 view from inside